Touch Up Supplies

U-30 Penetrating Oil Finish is ideal for all interior wood, wood furniture, cabinets, etc. Can also be used on cork, stone and terracotta. U-30 is safe and excellent for finishing toys and counter tops in the kitchen and bathroom. This is a very tough moisture and heat resistant finish. I've used it for years with great success. This is a simple, easy to use, good looking and very effective finish.
Directions: Ensure the surface is free from other finishes and clean. If previously oiled or waxed clean thoroughly with turpentine. Apply a coat of
U-30 Penetrating Oil Finish using a brush or cloth. Allow oil to penetrate for approx. 10 minutes then wipe off excess with a clean soft cloth. Allow to dry for at least 4 hours before recoating. After the final coat is dry rub with #0000 steelwool to eliminate all shine then you can paste wax for a brighter luster. The more coats applied the harder the surface and brighter the shine. For best results rub between coats with #0000 steelwool to remove shiny spots and make the finish smooth. Clean tools Learn More

U-30 Penetrating Oil Finish is ideal for all interior wood, wood furniture, cabinets, etc. Can also be used on cork, stone and terracotta. U-30 is safe and excellent for finishing toys and counter tops in the kitchen and bathroom. This is a very tough moisture and heat resistant finish. I've used it for years with great success. This is a simple, easy to use, good looking and very effective finish.
Directions: Ensure the surface is free from other finishes and clean. If previously oiled or waxed clean thoroughly with turpentine. Apply a coat of
U-30 Penetrating Oil Finish using a brush or cloth. Allow oil to penetrate for approx. 10 minutes then wipe off excess with a clean soft cloth. Allow to dry for at least 4 hours before recoating. After the final coat is dry rub with #0000 steelwool to eliminate all shine then you can paste wax for a brighter luster. The more coats applied the harder the surface and brighter the shine. For best results rub between coats with #0000 steelwool to remove shiny spots and make the finish smooth. Clean tools with mineral spirits.
Learn More