Your Source For Furniture Restoration Supplies
For Beginners to Experienced Woodworkers

Welcome

U-30 Penetrating Oil Finish 128 oz.

More Views

U-30 Penetrating Oil Finish 128 oz.
$114.95

Availability: In stock

U-30 Penetrating Oil Finish is ideal for all interior wood, wood furniture, cabinets, etc. Can also be used on cork, stone and terracotta. U-30 is safe and excellent for finishing toys and counter tops in the kitchen and bathroom. This is a very tough moisture and heat resistant finish. I've used it for years with great success. This is a simple, easy to use, good looking and very effective finish.
Directions: Ensure the surface is free from other finishes and clean. If previously oiled or waxed clean thoroughly with turpentine. Apply a coat of
U-30 Penetrating Oil Finish using a brush or cloth. Allow oil to penetrate for approx. 10 minutes then wipe off excess with a clean soft cloth. Allow to dry for at least 4 hours before recoating. After the final coat is dry rub with #0000 steelwool to eliminate all shine then you can paste wax for a brighter luster. The more coats applied the harder the surface and brighter the shine. For best results rub between coats with #0000 steelwool to remove shiny spots and make the finish smooth. Clean tools with mineral spirits.
Description

Details

U-30 Penetrating Oil Finish is ideal for all interior wood, wood furniture, cabinets, etc. Can also be used on cork, stone and terracotta. U-30 is safe and excellent for finishing toys and counter tops in the kitchen and bathroom. This is a very tough moisture and heat resistant finish. I've used it for years with great success. This is a simple, easy to use, good looking and very effective finish.
Directions: Ensure the surface is free from other finishes and clean. If previously oiled or waxed clean thoroughly with turpentine. Apply a coat of
U-30 Penetrating Oil Finish using a brush or cloth. Allow oil to penetrate for approx. 10 minutes then wipe off excess with a clean soft cloth. Allow to dry for at least 4 hours before recoating. After the final coat is dry rub with #0000 steelwool to eliminate all shine then you can paste wax for a brighter luster. The more coats applied the harder the surface and brighter the shine. For best results rub between coats with #0000 steelwool to remove shiny spots and make the finish smooth. Clean tools with mineral spirits.
Reviews

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Eric Melvin

910-876-7691

eric@kingdomrestorations.com

Kingdom Restorations 
19362 NC Highway 87 W
Tar Heel, NC 28392

Phone Calling Hours
Monday Thru Friday: 9:00AM - 8:00PM EST
Saturdays: 10:00AM - 6:00PM EST

Shop Hours
Monday Thru Friday 9:30AM - 4:00PM

What's Your Restoration Question?
Email Us Here

Copyright © 2020 Kingdom Restorations
All Rights Reserved