Search results for 'Wood Bleacher 125ml'
-
This is a 26 lb. Wool Felt Block. Which means it takes 26 pounds of wool compressed into a square yard 1 1/8 inches thick. Very firm but flexible. Excellent for use when sanding raw wood, rubbing out a finish topcoat or in between finish coats. Once you use this block, you'll be like me and it will become your "go to" block.
Learn More
-
Potassium Permanganate is one of the most widely used chemicals for coloring wood. It comes in violet crystals to be dissolved in cold water.The colors resulting from its use are beautiful, transparent nut browns. Works excellent on hardwoods. It gives maple a golden brown color.
Mix 3 ozs. in a half gallon of water for a medium solution. The first color noted upon application is violet, but changes to brown when dry. The stronger the solution the darker the color.
Learn More
-
Potassium Bichromate is an orange crystal that when dissolved in water and applied to certain woods will turn them a deep brown. The amount of tannin in the wood will determine the depth of color. Works well on hardwoods like oak, ash, cherry, walnut, etc. It works very well on mahogany to produce deep browns. Always experement on scraps to determine suitability.
Mix 1/2 oz. Potassium Bichromate to 1/2 gallon of water for a medium strength mix. For a stronger mix add more crystal or make a second application. For lighter shades add water to dilute the solution.
Potassium Bichromate is an oxidizer. Always wear gloves when handeling. Wear a dust mask when handeling the dry crystal.
Learn More
-
U-30 Penetrating Oil Finish is ideal for all interior wood, wood furniture, cabinets, etc. Can also be used on cork, stone and terracotta. U-30 is safe and excellent for finishing toys and counter tops in the kitchen and bathroom. This is a very tough moisture and heat resistant finish. I've used it for years with great success. This is a simple, easy to use, good looking and very effective finish.
Directions: Ensure the surface is free from other finishes and clean. If previously oiled or waxed clean thoroughly with turpentine. Apply a coat of
U-30 Penetrating Oil Finish using a brush or cloth. Allow oil to penetrate for approx. 10 minutes then wipe off excess with a clean soft cloth. Allow to dry for at least 4 hours before recoating. After the final coat is dry rub with #0000 steelwool to eliminate all shine then you can paste wax for a brighter luster. The more coats applied the harder the surface and brighter the shine. For best results rub between coats with #0000 steelwool to remove shiny spots and make the finish smooth. Clean tools with mineral spirits.
Learn More
-
These oil based aniline dye powders can be disolved in turpentine, naphtha or any oil based varnish or paint. Use them to make stain for wood or tint different oil based mediums including many paste waxes. They are excellent for tinting a final finish for color adjustment. Use them in combinations to achieve a variety of wood or color tones. The colors are brilliant, complex and penetrate deeply. A good choice for the pro who wants an edge. Mix 1 oz. dye to 16 oz. solvent for a medium tone. The more dye you add the deeper the tone.
Learn More
-
These oil based aniline dye powders can be disolved in turpentine, naphtha or any oil based varnish or paint. Use them to make stain for wood or tint different oil based mediums including many paste waxes. They are excellent for tinting a final finish for color adjustment. Use them in combinations to achieve a variety of wood or color tones. The colors are brilliant, complex and penetrate deeply. A good choice for the pro who wants an edge. Mix 1 oz. dye to 16 oz. solvent for a medium tone. The more dye you add the deeper the tone.
Learn More
-
These oil based aniline dye powders can be disolved in turpentine, naphtha or any oil based varnish or paint. Use them to make stain for wood or tint different oil based mediums including many paste waxes. They are excellent for tinting a final finish for color adjustment. Use them in combinations to achieve a variety of wood or color tones. The colors are brilliant, complex and penetrate deeply. A good choice for the pro who wants an edge. Mix 1 oz. dye to 16 oz. solvent for a medium tone. The more dye you add the deeper the tone.
Learn More
-
This 20cc syringe & needle are perfect for injecting Wood Worm Killer into wood worm holes, getting them where they live.
Also excellent for injecting glue into joints.
Learn More
-
Complete set of 7 color samples of American Paste Wax, each sample is 7/8 oz.Manufactured in the USA, American Custom Paste Wax is perfect for protecting and enhancing all types of wood and finishes. Choose from a variety of colors to revive faded wood tones and cover most scratches.
A custom blend of beeswax and other natural waxes in a solvent base to give ease of use, fast drying time, a smooth easy buff and excellent luster. You won’t be disappointed. Once you try it you won't use any other wax.
For larger volume pricing, please call: 1-800-344-9257.
Learn More
-
Your choice of three color samples of American Paste Wax, each sample is 7/8oz.Manufactured in the USA, American Custom Paste Wax is perfect for protecting and enhancing all types of wood and finishes. Choose from a variety of colors to revive faded wood tones and cover most scratches.
A custom blend of beeswax and other natural waxes in a solvent base to give ease of use, fast drying time, a smooth easy buff and excellent luster. You won’t be disappointed. Once you try it you won't use any other wax.
For larger volume pricing, please call: 1-800-344-9257.
Learn More
