Search results for '0000 Steel Wool'
-
$42.95Rosini's American Custom Liming Wax is the best White Wax for achieving a Limed, Cerused or Whitewashed finish. It works best on woods that have deep open pores like oak. However with a bit of skill you can get great effects on tight grained woods like pine, maple, birch.....
Purpose: To add a white color to the grain of the wood.
Preparation: Ensure the surface is clean and dry.If working with raw hardwood, use a brass or bronze brush in a sweeping motion to remove the soft wood around the pores and to score and open the pores of soft woods. You can also use a wire brush or coarse sandpaper.
Application: Work the Liming Wax into the grain of the wood using #0000 Steel Wool or a lint-free Cheesecloth Wipe. Spread the wax out following the grain of the wood wherever possible. Let dry about 3 minutes and wipe off excess with a clean Cheesecloth Wipe. Once set up, to remove white haze, (if you don't like it), use the American Custom Paste in Neutral and wipe it through the work until you're satisfied with the result. The beauty of the technique is that if you don't like the way it looks, you can wipe out the Liming Wax with Mineral Spirits and start over.
Should you want a more durable finish you can apply my U-30 Finishing Oil over the Liming Wax. The more coats the more protection and the higher the shine. 2-3 coats is recommended. Then apply the American Custom Paste Wax in Neutral or another tint if you like, using #0000 Steel Wool over the U-30, allow to dry overnight and buff with a Cheesecloth Wipe. For a softer sheen use #0000 Steel Wool.
Feel free to give a call, 252-955-0156. Learn More -
$19.95Liberon Steel Wool is of the very highest quality and is chosen and recommended by craftsmen around the world. It is produced using a high quality steel to create a crumble and dust resistant wool that is virtually oil free with no rogue strands. It has been packed in rolls to enable you to cut off convenient sized strips as required for use in and around the home or workplace. Liberon Steel Wool is available in seven grades from the renowned extra fine 0000 through a range of fine to medium 00, 0, 1 and medium to coarse 2, 3, and 4.
Liberon Extra Fine Steel Wool is ideal for polishing and cleaning delicate surfaces. Use Liberon Steel Wool Grade 0000 to cut back between coats of French polishes, varnishes, and oil finishes; to clean and polish metals such as bronze, copper, chrome, stainless steel, and aluminum; to cut back between coats of varnish or paint; or use it with soapy water to clean and polish porcelain, marble, and glass without marking. Learn More
-
$34.95Rosini's American Custom Liming Wax is the best White Wax for achieving a Limed, Cerused or Whitewashed finish. It works best on woods that have deep open pores like oak. However with a bit of skill you can get great effects on tight grained woods like pine, maple, birch.....
Purpose: To add a white color to the grain of the wood.
Preparation: Ensure the surface is clean and dry.If working with raw hardwood, use a brass or bronze brush in a sweeping motion to remove the soft wood around the pores and to score and open the pores of soft woods. You can also use a wire brush or coarse sandpaper.
Application: Work the Liming Wax into the grain of the wood using #0000 Steel Wool or a lint-free Cheesecloth Wipe. Spread the wax out following the grain of the wood wherever possible. Let dry about 3 minutes and wipe off excess with a clean Cheesecloth Wipe. Once set up, to remove white haze, (if you don't like it), use the American Custom Paste in Neutral and wipe it through the work until you're satisfied with the result. The beauty of the technique is that if you don't like the way it looks, you can wipe out the Liming Wax with Mineral Spirits and start over.
Should you want a more durable finish you can apply my U-30 Finishing Oil over the Liming Wax. The more coats the more protection and the higher the shine. 2-3 coats is recommended. Then apply the American Custom Paste Wax in Neutral or another tint if you like, using #0000 Steel Wool over the U-30, allow to dry overnight and buff with a Cheesecloth Wipe. For a softer sheen use #0000 Steel Wool.
Feel free to give a call, 910-876-7691. Learn More -
$249.95Rosini's American Custom Liming Wax is the best White Wax for achieving a Limed, Cerused or Whitewashed finish. It works best on woods that have deep open pores like oak. However with a bit of skill you can get great effects on tight grained woods like pine, maple, birch.....
Purpose: To add a white color to the grain of the wood.
Preparation: Ensure the surface is clean and dry.If working with raw hardwood, use a brass or bronze brush in a sweeping motion to remove the soft wood around the pores and to score and open the pores of soft woods. You can also use a wire brus or coarse sandpaper.
Application: Work the Liming Wax into the grain of the wood using #0000 Steel Wool or a lint-free Cheesecloth Wipe. Spread the wax out following the grain of the wood wherever possible. Let dry about 3 minutes and wipe off excess with a clean Cheesecloth Wipe. Once set up, to remove white haze, (if you don't like it), use the American Custom Paste in Neutral and wipe it through the work until you're satisfied with the result. The beauty of the technique is that if you don't like the way it looks, you can wipe out the Liming Wax with Mineral Spirits and start over.
Should you want a more durable finish you can apply my U-30 Finishing Oil over the Liming Wax. The more coats the more protection and the higher the shine. 2-3 coats is recommended. Then apply the American Custom Paste Wax in Neutral or another tint if you like, using #0000 Steel Wool over the U-30, allow to dry overnight and buff with a Cheesecloth Wipe. For a softer sheen use #0000 Steel Wool.
Feel free to give a call, 910-876-7691. Learn More -
$59.9500000 steel wool is instrumental in the furniture restoration process. This 5 pound reel will last and can be used to cut back between coats of varnish or paint; or use it to rub out finishes, to apply wax and adjust sheens, to clean and polish metals such as bronze, copper, and stainless steel or with soapy water to clean and polish porcelain and marble;
Rosini's American Made 0000 Steel Wool provides a good multi-purpose grade at a competitive price. Learn More
-
$17.9500000 steel wool pads are instrumental in the furniture restoration process. Used to clean and polish metals such as bronze, copper, and stainless steel; to cut back between coats of varnish or paint; or use it with soapy water to clean and polish porcelain, and marble; to rub out finishes; to apply wax and adjust sheens.
Rosini's American Made 00000 Steel Wool Pads provide a good multi-purpose grade at a competitive price. Each pack contains 8 pads. Learn More
-
$39.95After several people asked about Chalk Paint Wax I decided to go ahead and develope a formula for the best Chalk Paint Wax on the market. I tested a variety of the most famous Chalk Paint Waxes and compared them to my newest formula with surprising results. The American Custom Chalk Paint Wax outperformed the others in ease of application, distinction of color, ease of buff and a way better luster. Once you try it you won't be disappointed.
If you need a custom color feel free to call me, there's no extra charge.
Perfect for all kinds of antiquing, tinting, ageing and color shifting. Protects and enhances all types of finishes and painted surfaces.
DIRECTIONS:
Apply the wax with a soft cloth, brush, or fine steel wool to one section at a time. Make sure you cover the entire surface with the wax. Once covered begin to distribute the wax so that it appears dark inside cracks, crevasses, moldings and areas where there is a construction detail. On flat surfaces such as tops and sides distribute the wax evenly but at the same time leaving highlights of the tint as you stretch the wax out. Manipulate the wax so that the end result is pleasant to you. You can use the brush to daub on the wax and the steel wool to remove excess. Be creative using the tools you have. Remember if you don't like the way it looks, you can always wash it off with mineral spirits and start again. Learn More -
$8.95Liberon Grade 00 Steel Wool Pads are the professional choice. They are produced using high quality steel to create a crumble and dust resistant wool. Clean and easy to use and virtually oil free.
Use them to clean, prepare and maintain wood and metal surfaces. Can be used when applying wax to raw wood or selected country finishes.
Always cut to size with scissors or shears. Protect your hands with gloves when handeling. Steel wool is highly flammable. Keep away from all sources of fire, sparks and electricity.
Keep out of reach of children. Learn More -
$114.95U-30 Penetrating Oil Finish is ideal for all interior wood, wood furniture, cabinets, etc. Can also be used on cork, stone and terracotta. U-30 is safe and excellent for finishing toys and counter tops in the kitchen and bathroom. This is a very tough moisture and heat resistant finish. I've used it for years with great success. This is a simple, easy to use, good looking and very effective finish.
Directions: Ensure the surface is free from other finishes and clean. If previously oiled or waxed clean thoroughly with turpentine. Apply a coat of
U-30 Penetrating Oil Finish using a brush or cloth. Allow oil to penetrate for approx. 10 minutes then wipe off excess with a clean soft cloth. Allow to dry for at least 4 hours before recoating. After the final coat is dry rub with #0000 steelwool to eliminate all shine then you can paste wax for a brighter luster. The more coats applied the harder the surface and brighter the shine. For best results rub between coats with #0000 steelwool to remove shiny spots and make the finish smooth. Clean tools with mineral spirits.
Learn More -
$44.95U-30 Penetrating Oil Finish is ideal for all interior wood, wood furniture, cabinets, etc. Can also be used on cork, stone and terracotta. U-30 is safe and excellent for finishing toys and counter tops in the kitchen and bathroom. This is a very tough moisture and heat resistant finish. I've used it for years with great success. This is a simple, easy to use, good looking and very effective finish.
Directions: Ensure the surface is free from other finishes and clean. If previously oiled or waxed clean thoroughly with turpentine. Apply a coat of
U-30 Penetrating Oil Finish using a brush or cloth. Allow oil to penetrate for approx. 10 minutes then wipe off excess with a clean soft cloth. Allow to dry for at least 4 hours before recoating. After the final coat is dry rub with #0000 steelwool to eliminate all shine then you can paste wax for a brighter luster. The more coats applied the harder the surface and brighter the shine. For best results rub between coats with #0000 steelwool to remove shiny spots and make the finish smooth. Clean tools Learn More