Search results for 'Orange mineral powders'
-
$99.95Whether you're completing repairs or working a full restoration, there is, in most cases, a need for touch up. With this color box, customizing any color tone is possible.These 12 colors are dry powders. Some are aniline dyes, some are earth pigments, others are colors ground from stone. They are disolved best in alcohol and alcohol based finishes. They work exceptionally well with our pre mixed French polish - Rocket Pad. Learn More
-
$249.95Rosini's American Custom Liming Wax is the best White Wax for achieving a Limed, Cerused or Whitewashed finish. It works best on woods that have deep open pores like oak. However with a bit of skill you can get great effects on tight grained woods like pine, maple, birch.....
Purpose: To add a white color to the grain of the wood.
Preparation: Ensure the surface is clean and dry.If working with raw hardwood, use a brass or bronze brush in a sweeping motion to remove the soft wood around the pores and to score and open the pores of soft woods. You can also use a wire brus or coarse sandpaper.
Application: Work the Liming Wax into the grain of the wood using #0000 Steel Wool or a lint-free Cheesecloth Wipe. Spread the wax out following the grain of the wood wherever possible. Let dry about 3 minutes and wipe off excess with a clean Cheesecloth Wipe. Once set up, to remove white haze, (if you don't like it), use the American Custom Paste in Neutral and wipe it through the work until you're satisfied with the result. The beauty of the technique is that if you don't like the way it looks, you can wipe out the Liming Wax with Mineral Spirits and start over.
Should you want a more durable finish you can apply my U-30 Finishing Oil over the Liming Wax. The more coats the more protection and the higher the shine. 2-3 coats is recommended. Then apply the American Custom Paste Wax in Neutral or another tint if you like, using #0000 Steel Wool over the U-30, allow to dry overnight and buff with a Cheesecloth Wipe. For a softer sheen use #0000 Steel Wool.
Feel free to give a call, 910-876-7691. Learn More -
$39.95Aqueous Stain Binder is a non film forming binder for water stain powders. It helps to prevent migration of dye into coating.
Directions: Measure stain powder at desired strength. Dissolve powder into Aqueous Stain Binder. May be diluted with water up to 50% and still maintain binding effect. Dries in 30 minutes. When dry, proceed with coating application as usual. Learn More -
$114.95U-30 Penetrating Oil Finish is ideal for all interior wood, wood furniture, cabinets, etc. Can also be used on cork, stone and terracotta. U-30 is safe and excellent for finishing toys and counter tops in the kitchen and bathroom. This is a very tough moisture and heat resistant finish. I've used it for years with great success. This is a simple, easy to use, good looking and very effective finish.
Directions: Ensure the surface is free from other finishes and clean. If previously oiled or waxed clean thoroughly with turpentine. Apply a coat of
U-30 Penetrating Oil Finish using a brush or cloth. Allow oil to penetrate for approx. 10 minutes then wipe off excess with a clean soft cloth. Allow to dry for at least 4 hours before recoating. After the final coat is dry rub with #0000 steelwool to eliminate all shine then you can paste wax for a brighter luster. The more coats applied the harder the surface and brighter the shine. For best results rub between coats with #0000 steelwool to remove shiny spots and make the finish smooth. Clean tools with mineral spirits.
Learn More -
$19.95U-30 Penetrating Oil Finish is ideal for all interior wood, wood furniture, cabinets, etc. Can also be used on cork, stone and terracotta. U-30 is safe and excellent for finishing toys and counter tops in the kitchen and bathroom. This is a very tough moisture and heat resistant finish. I've used it for years with great success. This is a simple, easy to use, good looking and very effective finish.
Directions: Ensure the surface is free from other finishes and clean. If previously oiled or waxed clean thoroughly with turpentine. Apply a coat of
U-30 Penetrating Oil Finish using a brush or cloth. Allow oil to penetrate for approx. 10 minutes then wipe off excess with a clean soft cloth. Allow to dry for at least 4 hours before recoating. After the final coat is dry rub with #0000 steelwool to eliminate all shine then you can paste wax for a brighter luster. The more coats applied the harder the surface and brighter the shine. For best results rub between coats with #0000 steelwool to remove shiny spots and make the finish smooth. Clean tools with mineral spirits. Learn More -
$12.95Potassium Bichromate is an orange crystal that when dissolved in water and applied to certain woods will turn them a deep brown. The amount of tannin in the wood will determine the depth of color. Works well on hardwoods like oak, ash, cherry, walnut, etc. It works very well on mahogany to produce deep browns. Always experement on scraps to determine suitability.
Mix 1/2 oz. Potassium Bichromate to 1/2 gallon of water for a medium strength mix. For a stronger mix add more crystal or make a second application. For lighter shades add water to dilute the solution.
Potassium Bichromate is an oxidizer. Always wear gloves when handeling. Wear a dust mask when handeling the dry crystal. Learn More -
$29.95U-30 Penetrating Oil Finish is ideal for all interior wood, wood furniture, cabinets, etc. Can also be used on cork, stone and terracotta. U-30 is safe and excellent for finishing toys and counter tops in the kitchen and bathroom. This is a very tough moisture and heat resistant finish. I've used it for years with great success. This is a simple, easy to use, good looking and very effective finish.
Directions: Ensure the surface is free from other finishes and clean. If previously oiled or waxed clean thoroughly with turpentine. Apply a coat of
U-30 Penetrating Oil Finish using a brush or cloth. Allow oil to penetrate for approx. 10 minutes then wipe off excess with a clean soft cloth. Allow to dry for at least 4 hours before recoating. After the final coat is dry rub with #0000 steelwool to eliminate all shine then you can paste wax for a brighter luster. The more coats applied the harder the surface and brighter the shine. For best results rub between coats with #0000 steelwool to remove shiny spots and make the finish smooth. Clean tools with mineral spirits.
Learn More -
$31.95These oil based aniline dye powders can be disolved in turpentine, naphtha or any oil based varnish or paint. Use them to make stain for wood or tint different oil based mediums including many paste waxes. They are excellent for tinting a final finish for color adjustment. Use them in combinations to achieve a variety of wood or color tones. The colors are brilliant, complex and penetrate deeply. A good choice for the pro who wants an edge. Mix 1 oz. dye to 16 oz. solvent for a medium tone. The more dye you add the deeper the tone. Learn More -
$31.95These oil based aniline dye powders can be disolved in turpentine, naphtha or any oil based varnish or paint. Use them to make stain for wood or tint different oil based mediums including many paste waxes. They are excellent for tinting a final finish for color adjustment. Use them in combinations to achieve a variety of wood or color tones. The colors are brilliant, complex and penetrate deeply. A good choice for the pro who wants an edge. Mix 1 oz. dye to 16 oz. solvent for a medium tone. The more dye you add the deeper the tone. Learn More -
$31.95These oil based aniline dye powders can be disolved in turpentine, naphtha or any oil based varnish or paint. Use them to make stain for wood or tint different oil based mediums including many paste waxes. They are excellent for tinting a final finish for color adjustment. Use them in combinations to achieve a variety of wood or color tones. The colors are brilliant, complex and penetrate deeply. A good choice for the pro who wants an edge. Mix 1 oz. dye to 16 oz. solvent for a medium tone. The more dye you add the deeper the tone. Learn More