|Rust Remover deoxidises metal surfaces, removing rust and creating a barrier against further oxidation. It is suitable for use on ferrous metals, brass, copper and bronze. Rust Remover can also be used to degrease and clean most metal surfaces prior to coloring with Liberon Antiquing Fluid, Haematite, Iron Paste or paint.
Rust Remover DirectionsRemove loose rust with a wire brush, apply Rust Remover with a brush to the affected area only. Allow the surface to whiten, brush off white film with a wire brush and repeat the process until no more white deposit appears. Then apply a final coat to inhibit re-oxidation.
To de-grease non-ferrous metals including brass, copper, and bronze prior to antiquing, polishing or painting, apply one coat to the metal surface and leave for approximately 20 minutes, then rinse with a clean cold water and allow to dry.
Important: Always test products first on spare metal or on an incospicuous area to check color, compatibility and end results.
Precautions: Always wear rubber gloves and eye protection when using this product.
Please refer to product label for complete product information.